GIFTS AND MISCELLANEOUS


 

Roped Mallet

US$100.00

Traditional Japanese wooden mallets wrapped with 550 paracords. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. Email your logo and/or engraving message to sales@jaymilproducts.com, or use the text field option.

 

Roped Paddles

US$125.00

Our paddles are wrapped with 550 paracords. Ghillie jute strings are added to emulate paddles used by Spec Ops personnel. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below.

For customization, please email us at sales@jaymilproducts.com.

 

15-1/2"  (L) x 2-1/4" (H). Holds Approximately 30 Coins. Can be personalized with an engraved plate that can be installed on the back of the holder.

15-1/2" L x 3-1/4" H. Holds Approximately 40 Coins. Can be personalized with an engraved plate that can be installed on the back of the holder.

15-1/2" L x 4-1/2" H. Holds Approximately 50 Coins. Can be personalized with an engraved plate that can be installed on the back of the holder.

Foot Locker

US$750.00

19" L x 11-1/8" W x 12-1/2" H. Box interior comes with coin slots that hold approx 45 coins. The top cover is adorned with the USMC logo.

Available for pickup at our Okinawa store only. For shipping within CONUS, please enquire before placing your order. (Email: sales@jaymilproducts.com)

Paper Weight

US$25.00

3-3/4" W x 4" H x Approx 1/2" T, USMC Enlisted Logo Design, Gold Finish, Flat Back

Paper Weight

US$35.00

3-3/4" W x 4" H x Approx 1/2" T, USMC Officer Logo Design, Gold + Nickel Finish, Flat Back

Bronze Finish, EGA on Front Design

A handcrafted original by Cerrito. A beautiful ruby red rosette adorned with USMC's EGA. A gift for a USMC spouse.

LIMITED STOCK 

Taiko Drum

US$175.00

The taiko drum is a Japanese percussion instrument. It is 6" in diameter and stands 10-1/2" with the wooden stand. It's made of Japanese open-ended wooden barrel and genuine animal skin. It is played with two wooden sticks (bachi). This item is an ideal going-away gift with a Japanese theme. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below.

 

This samurai glass helmet is an original art handcrafted by Yamasaki Shinichi. It stands approx 5-1/2 " and 7" wide. This is an ideal going-away gift with a Japanese theme. A 12" wide x 10-1/4" L x 4-1/2" H wooden stand can be purchased separately. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, maximum of 50 words.

SHIPPING TO A NON-JAPANESE ADDRESS IS LIMITED. PLEASE ENQUIRE BEFORE PLACING YOUR ORDER (email: sales@jaymilproducts.com).

CE Bust Figurine

US$250.00

The figurine stands approx 8-3/4". This item is ideal for quarterly or annual awards. A 7" wide x 4-1/2" H wooden stand can be purchased separately. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, maximum of 50 words.

SHIPPING IS NOT AVAILABLE IN ALL AREAS. PLEASE ENQUIRE BEFORE PLACING YOUR ORDER (email: sales@jaymilproducts.com).

The figurine stands approx 11" H.  A 12" W x 10-1/4" L x 4-1/2" H wooden stand can be purchased separately. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, maximum of 50 words.

Shipping to some locations is not available. Please enquire before placing your order (email: sales@jaymilproducts.com).

Special Forces by Michael Garman. The figurine stands approx 13" H.  A 9" W x 4-1/2" H wooden stand can be purchased separately. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, maximum of 50 words.

SHIPPING TO SOME LOCATIONS IS NOT AVAILABLE. PLEASE ENQUIRE BEFORE PLACING YOUR ORDER (email: sales@jaymilproducts.com).

Navy/Marine Aviator by Terrance Patterson. The figurine stands approx 13" H.  A 9" W x 4-1/2" H wooden stand can be purchased separately. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, maximum of 50 words.

Shipping to some locations is not available. Please enquire before placing your order (email: sales@jaymilproducts.com).

Made of Philippine mahogany wood. 5" L x 2-1/2" W x 2" H. 

 

Ka-Bar Stand

US$85.00

15-3/4" L x 5-1/2" W x 9-1/2" H Wooden Ka-Bar holder. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, maximum of 50 words.

KA-BAR NOT INCLUDED!

 

13-3/4" W x 9-1/4" L Ka-Bar wall mount. Made of Japanese pine wood, cherry finish. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, a maximum of 50 words.

KA-BAR NOT INCLUDED

5" in Length, Brass Finish, Flat Back

The wooden base is approximately 12-1/2" in diameter. Prices for the rank accessories are NOT included in the price below. Place your rank selection in the Uniform Accessories category (https://www.jaymilproducts.com/products/c59-uniform-accessories/) and write instructions in the box below.

Swagger Stick

US$85.00

18" L wooden swagger stick. The wall mount comes separately. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. If an engraved plate is desired, write the text in the box below, maximum of 50 words.

 

Torii Gate

US$175.00

16-1/8 L x 9-1/4" W x 11-3/4" H, made of Japanese pine wood, cherry finish. Ideal for a going-away gift with a Japanese theme. This can be stuffed with one or two flags. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below.

SHIPPING TO A NON-JAPANESE ADDRESS IS LIMITED. PLEASE ENQUIRE BEFORE PLACING YOUR ORDER (email: sales@jaymilproducts.com).

Torii Gate 2

US$145.00

16-1/8" L x 5-3/4" W x 11-3/4" H, made of Japanese pine wood, cherry finish. Ideal for a going-away gift with a Japanese theme. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below.

SHIPPING TO A NON-JAPANESE ADDRESS IS LIMITED. PLEASE ENQUIRE BEFORE PLACING YOUR ORDER (email: sales@jaymilproducts.com).

 

4" x 2-1/2", Gold Finish, Flat Back

 

Roped Mallet

US$100.00

Traditional Japanese wooden mallets wrapped with 550 paracords. If you wish to embellish the plaque with a ribbon rack, ranks, etc., place your order in the appropriate category (e.g., Ribbon Mounting, Uniform Accessories), and provide instructions in the box below. Email your logo and/or engraving message to sales@jaymilproducts.com, or use the text field option.